E-Flite EFLA1080B 80Amp Pro SwitchMode BEC Brushless ESC EC5 (V2)
When performance matters in your high-current applications, look no further than the E-fliteĀ® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a āpro seriesā electronic speed control.
This product is not intended for use by children under 14 years of age without direct adult supervision.
Features
- Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
- 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
- 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
- Programmable throttle input range (1.1msā1.9ms or 1.2msā1.8ms)
- Programmable soft start-up rate - .25 second or 1 second
- Auto motor shut down if signal is lost or there is interference
- Programmable timingā5 user-selectable rangesāuse with a large variety of brushless motors
- Two operating modesāAirplane or Heli
- Pre-wired connectorsāE-flite EC5 on battery input and 4.0mm female
- gold bullets on motor output leads
- NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)
Specs
- Amperage: 60 & Up
- Auto Cutoff: Yes
- BEC Continous Current: 5A
- BEC Voltage: 5.5V Switch-mode
- Brakes: Yes
- Connector Type: EC5
- Forward: Yes
- Maximum Burst Current: 100A
- Output Connector: 4mm BulletOverload Protection: Yes
- Part Type: Electronics
- Programmable: Yes
- Time Delay Brake: Yes
Product Information
Product Information
Shipping & Returns
Shipping & Returns
E-Flite EFLA1080B 80Amp Pro SwitchMode BEC Brushless ESC EC5 (V2)
E-Flite EFLA1080B 80Amp Pro SwitchMode BEC Brushless ESC EC5 (V2)
When performance matters in your high-current applications, look no further than the E-fliteĀ® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a āpro seriesā electronic speed control.
This product is not intended for use by children under 14 years of age without direct adult supervision.
Features
- Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
- 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
- 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
- Programmable throttle input range (1.1msā1.9ms or 1.2msā1.8ms)
- Programmable soft start-up rate - .25 second or 1 second
- Auto motor shut down if signal is lost or there is interference
- Programmable timingā5 user-selectable rangesāuse with a large variety of brushless motors
- Two operating modesāAirplane or Heli
- Pre-wired connectorsāE-flite EC5 on battery input and 4.0mm female
- gold bullets on motor output leads
- NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)
Specs
- Amperage: 60 & Up
- Auto Cutoff: Yes
- BEC Continous Current: 5A
- BEC Voltage: 5.5V Switch-mode
- Brakes: Yes
- Connector Type: EC5
- Forward: Yes
- Maximum Burst Current: 100A
- Output Connector: 4mm BulletOverload Protection: Yes
- Part Type: Electronics
- Programmable: Yes
- Time Delay Brake: Yes
Original: $210.18
-70%$210.18
$63.05Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When performance matters in your high-current applications, look no further than the E-fliteĀ® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a āpro seriesā electronic speed control.
This product is not intended for use by children under 14 years of age without direct adult supervision.
Features
- Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
- 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
- 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
- Programmable throttle input range (1.1msā1.9ms or 1.2msā1.8ms)
- Programmable soft start-up rate - .25 second or 1 second
- Auto motor shut down if signal is lost or there is interference
- Programmable timingā5 user-selectable rangesāuse with a large variety of brushless motors
- Two operating modesāAirplane or Heli
- Pre-wired connectorsāE-flite EC5 on battery input and 4.0mm female
- gold bullets on motor output leads
- NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)
Specs
- Amperage: 60 & Up
- Auto Cutoff: Yes
- BEC Continous Current: 5A
- BEC Voltage: 5.5V Switch-mode
- Brakes: Yes
- Connector Type: EC5
- Forward: Yes
- Maximum Burst Current: 100A
- Output Connector: 4mm BulletOverload Protection: Yes
- Part Type: Electronics
- Programmable: Yes
- Time Delay Brake: Yes
